Gateways & interfaces
Models
IP-224
Dual IP remote adapter panel
-
Control Type
32-bit Digital Media Processor
Width
8.5" (215.9 mm)
Depth
11.5" (292.1 mm)
Height
1.625" (41.3 mm)
Power Requirements
+11Vdc to +16Vdc, 600mA nominal at 12Vdc
Electro Static Discharge Immunity
8kV on all exposed operator control areas At 8kV no operation is disturbed At 8kV no permanent damage
Line Protection
Fast-action solid state surge protection
Memory Protection
Settings preserved in non-volatile memory
Level Controls
Menu driven front panel controls for TX, RX, spare audio, and CTCSS
Weight
4.125lbs (1.9kg)
Audio Distortion
2% THD max
Relay Contact Ratings
1A at 63V AC/DC
Ethernet Speed
10BaseT or 100BaseTX
Storage Temperature
-30°C to 65°C (-22°F to 149°F) for full specifications
Operating Temperature
0°C to 50°C (32°F to 122°F) for full specifications
Flash Memory
128MB
SDRAM Memory
256MB
Lease Line
2-Wire and 4-Wire supported
Radio Interface
±45Vdc withstand rating
Hum & Noise
60dB below rated output for each line
Non-Relay Outputs
Open collector, active low, 200mA max., 40V collector to emitter voltage
Radio Input Level
10mVp-p to 10Vp-p, adjustable
Line Output Level
10mVp-p to 10Vp-p, adjustable (Single Ended), 20mVp-p to 40Vp-p, adjustable (Balanced)
Tone Frequencies
Single or dual function tone generation Function tone range 0 Hz–3200Hz adjustable in 1Hz increments, Total tone duration 0 ms–999ms, Tone magnitude -60dB to +12dB
Vocoders
Telex 32K (50 kbits/sec simplex), G.726 16K (34 kbits/sec simplex) G.726 32K (50 kbits/sec simplex), G.711 (82 kbits/sec simplex)
Digital I/O Ratings
Pull up/pull down/float 3.3VDC/5VDC/12V 10K Ohm pull up/pull down
Transmit Output Impedance
600 Ohms for balanced mode, 200 Ohms for single-ended mode
Receive Input Impedance
10/600/10K Ohms (user-selectable)
Audio Frequency Response
300Hz to 3000Hz + 1, -3dB less than 3% distortion
LAM Sensitivity
-50dB to +10dB
COR Sensitivity
User-selectable rising or falling edge from radio
DTMF Detection Bandwidth
±25Hz around center of frequency
Monitor Timer
10ms to 9999ms, adjustable
DSP-223 |
IP-224 |
NEO-10 | |
Control Type | 32-bit Digital Media Processor | ||
Width | 8.5" (215.9 mm) | ||
Depth | 11.5" (292.1 mm) | ||
Height | 1.625" (41.3 mm) | ||
Power Requirements | +11Vdc to +16Vdc, 600mA nominal at 12Vdc | ||
Electro Static Discharge Immunity | 8kV on all exposed operator control areas At 8kV no operation is disturbed At 8kV no permanent damage | ||
Line Protection | Fast-action solid state surge protection | ||
Memory Protection | Settings preserved in non-volatile memory | ||
Level Controls | Menu driven front panel controls for TX, RX, spare audio, and CTCSS | ||
Weight | 4.125lbs (1.9kg) | ||
Audio Distortion | 2% THD max | ||
Relay Contact Ratings | 1A at 63V AC/DC | ||
Ethernet Speed | 10BaseT or 100BaseTX | ||
Storage Temperature | -30°C to 65°C (-22°F to 149°F) for full specifications | ||
Operating Temperature | 0°C to 50°C (32°F to 122°F) for full specifications | ||
Flash Memory | 128MB | ||
SDRAM Memory | 256MB | ||
Lease Line | 2-Wire and 4-Wire supported | ||
Radio Interface | ±45Vdc withstand rating | ||
Hum & Noise | 60dB below rated output for each line | ||
Non-Relay Outputs | Open collector, active low, 200mA max., 40V collector to emitter voltage | ||
Radio Input Level | 10mVp-p to 10Vp-p, adjustable | ||
Line Output Level | 10mVp-p to 10Vp-p, adjustable (Single Ended), 20mVp-p to 40Vp-p, adjustable (Balanced) | ||
Tone Frequencies | Single or dual function tone generation Function tone range 0 Hz–3200Hz adjustable in 1Hz increments, Total tone duration 0 ms–999ms, Tone magnitude -60dB to +12dB | ||
Vocoders | Telex 32K (50 kbits/sec simplex), G.726 16K (34 kbits/sec simplex) G.726 32K (50 kbits/sec simplex), G.711 (82 kbits/sec simplex) | ||
Digital I/O Ratings | Pull up/pull down/float 3.3VDC/5VDC/12V 10K Ohm pull up/pull down | ||
Transmit Output Impedance | 600 Ohms for balanced mode, 200 Ohms for single-ended mode | ||
Receive Input Impedance | 10/600/10K Ohms (user-selectable) | ||
Audio Frequency Response | 300Hz to 3000Hz + 1, -3dB less than 3% distortion | ||
LAM Sensitivity | -50dB to +10dB | ||
COR Sensitivity | User-selectable rising or falling edge from radio | ||
DTMF Detection Bandwidth | ±25Hz around center of frequency | ||
Monitor Timer | 10ms to 9999ms, adjustable | ||
Learn More | Learn More | Learn More |
Show more specs
Videos
IP-224 Introduction
IP-224 features & options
Downloads
Warranty & After Sales Programs