One moment please while we configure for you...

Welcome to RTS. Please specify your country so we can customize your experience.

The Americas
Asia & the Pacific Rim
the Middle East, & Africa
Latin America

Manual Authorization Required

You must be manually authorization to access this file



Dual IP Remote Adapter Panel

  • Ethernet TX and LINK LEDs
  • PTT (Push To Talk) Monitor, F1 and F2 relays
  • Four (4) PTT Modes and Three (3) Monitor Modes
  • Nine (9) Selectable PTT Frequencies
  • Seven (7) Digital Outputs for Channel Selection
  • CTCSS (Continuous Tone Coded Squelch System) Generation(64 frequencies)
  • Software Gain Control
  • Direct Radio Control
  • Handset Port for Monitoring Activity and Transmission
  • Single Function Tone Recognition (16 Function Tones)
  • AGC (Automatic Gain Control)
  • RX (Receive) Audio Squelch
  • ANI (Automatic Number Identification) Over-the-Air Protocol
  • Up to 1000 function tones supported
  • MDC1 and FleetSync1 Encode/Decode
  • SOIP (Serial Over Internet Protocol)
  • Dual Ethernet Interface for Backup Solution
  • Supports RS485, CAN Bus, RS232 and TTL
  • Backwards Compatible with Telex Radio Dispatch Products
  • Secure Remote Web Browser Programming and Configuration
  • Single or Dual Function Tone Generation
  • Guard Tone User-Selectable for 2100Hz, 2175Hz, 2300Hz, 2325Hz,2400Hz, 2600Hz, 2800Hz, 2850Hz or 2900 Hz
  • Menu Driven Front Panel Control for TX, RX, Spare Audio, and CTCSS
  • Kenwood Radios: x80 Series x90 Series x150 Seriesx180 Series 5 x 10 P25 SeriesNEXEDGE
  • EF Johnson RS5300 P25 Radio Interface
  • iDEN
  • Sprint Direct Connect
  • Motorola
  • Phone System
  • iCOM Radios
  • Vertex Radios
  • Sepura Radios─SRM2000 TETRA
Audio Distortion 2% THD max.
Audio Frequency Response 300Hz to 3000Hz + 1, -3dB less than 3% distortion
Control Type 32-bit Digital Media Processor
COR Sensitivity User-selectable rising or falling edge from radio
Depth 11.5" (292.1 mm)
Digital I/O Ratings Pull up/pull down/fl oat 3.3VDC/5VDC/12V 10K Ohm pull up/pull down
DTMF Detection Bandwidth ±25Hz around center of frequency
Electro Static Discharge Immunity 8kV on all exposed operator control areas At 8kV no operation is disturbed At 8kV no permanent damage
Ethernet Speed 10Base-T or 100Base-TX
Flash Memory 128MB
Height 1.63" (41.3 mm)
Hum and Noise 60dB below rated output for each line
LAM Sensitivity -50dB to +10dB
Lease Line 2-Wire and 4-Wire supported
Level Controls Menu driven front panel controls for TX, RX, spare audio, and CTCSS
Line Output Level 10mVp-p to 10Vp-p, adjustable (Single Ended), 20mVp-p to 40Vp-p, adjustable (Balanced)
Line Protection Fast-action solid state surge protection
Memory Protection Settings preserved in non-volatile memory
Monitor Timer 10ms to 9999ms, adjustable
Non-Relay Outputs Open collector, active low, 200mA max., 40V collector to emitter voltage
Operating Temperature 0 to 50 °C
Power Requirements +11Vdc to +16Vdc, 600mA nominal at 12Vdc
Radio Input Level 10mVp-p to 10Vp-p, adjustable
Radio Interface ±45Vdc withstand rating
Receive Input Impedance 10/600/10K Ohms (user-selectable)
Relay Contact Ratings 1A at 63V AC/DC
SDRAM Memory 256MB
Storage Temperature -30 to 65 °C
Tone Frequencies Single or dual function tone generation Function tone range 0 Hz–3200Hz adjustable in 1Hz increments, Total tone duration 0 ms–999ms, Tone magnitude -60dB to +12dB
Transmit Output Impedance 600 Ohms for balanced mode, 200 Ohms for single-ended mode
Vocoders Telex 32K (50 kbits/sec simplex), G.726 16K (34 kbits/sec simplex), G.726 32K (50 kbits/sec simplex), G.711 (82 kbits/sec simplex)
Weight 4.19 lbs (1.9 kg)
Width 8.54" (216.9 mm)


IP-224 features and options


Hover over image to zoom
Click image for full-size
Optional accessories
may be shown

Related News

Related products

Share this with:
E-mail Email