One moment please while we configure for you...

Welcome to RTS. Please specify your country so we can customize your experience.

The Americas
Asia & the Pacific Rim
the Middle East, & Africa
Latin America

Manual Authorization Required

You must be manually authorization to access this file



Telephone IP Based Console

  • Call history – Up to last 50 incoming calls displayed.
  • Autodial from history list and phone list.
  • Caller ID (Phone, iDEN, MDC, FleetSync, TETRA and 5-tone).
  • IDEN Support – Full support of NI-223 features, including ID, go-ahead beeps, busy signal and manual dial.
  • Scan feature for supported radios.
  • Emergency – Decodes incoming emergency signals from supported ANI formats.
  • Clear/Coded Transmit for EFJ RS5300 mobile radio.
  • Radio Telephone Operation – Allows local console to change channel of the remote radio via POTS line. Also gives operators the ability to designate certain lines to automatically failover to a standard POTS line if the IP connection fails.
  • Telex System Manager (TSM): View, manipulate and manage multiple Telex device parameters and settings. Easily detect all Telex devices on the network for easy configuration.
  • Kenwood P25 TK5710/5810 serial control – Supports encode and decode of FleetSync ID and P25 ID, channel change, scan ON/OFF, and monitor. Also capable of direct serial control of Kenwood 80, 90, and 150 series radios.
  • Generate FleetSync MSK signal at the IP223 – Does not require specific Kenwood base station.
  • 100 talkgroup/frequency control
  • Simplex/full-duplex (field programmable)
  • Crossmute (Ethernet based)
  • Parallel console update
  • Instant Recall Recorder (IRR)
  • Line select call with alarm Controls
  • Monitor, Intercom, PTT
  • Up to two alert tones
  • Crosspatch
  • Supervisory control
  • 16-digit DTMF keypad
  • Volume controls
  • Parallel TX LED detect
  • Frequency selection
  • Menu button for direct menu access
  • NEO-10 relay control
  • Paging (two-tone, DTMF, and manual)
Amplifier Power 2W maximum at 3%THD into an 8 Ohm load or equivalent
Audio Distortion 3% maximum at full compression
Audio Frequency Response ±1.5dB, 300 to 3000Hz, except at the transmit tone notch frequency
Audio Levels Range: RX +12dB through -34.5dB, TX +12dB through -34.5dB
Color White
Connections 4-wire Handset, 6-wire Desk mic
Depth 10" (254 mm)
Ethernet Speed 10 BaseT or 100 BaseTX
Form Factor Desktop
Height 3" (76.2 mm)
Hum and Noise 50dB below operating levels
Operating Temperature 0° to 50 °C (32° to 122°F)
Power Requirements +12VDC at 1A maximum
Speaker 1.5” x 3” oval, 8 Ohm
Weight 2.94 lbs (1.33 kg)
Width 8" (203.2 mm)


Hover over image to zoom
Click image for full-size
Optional accessories
may be shown

Related News

Share this with:
E-mail Email