http://www.telex.com

IP-2002

Telephone IP Based Console

Call history – Up to last 50 incoming calls displayed.
Autodial from history list and phone list.
Caller ID (Phone, iDEN, MDC, FleetSync, TETRA and 5-tone).
IDEN Support – Full support of NI-223 features, including ID, go-ahead beeps, busy signal and manual dial.
Scan feature for supported radios.
Emergency – Decodes incoming emergency signals from supported ANI formats.
Clear/Coded Transmit for EFJ RS5300 mobile radio.
Radio Telephone Operation – Allows local console to change channel of the remote radio via POTS line. Also gives operators the ability to designate certain lines to automatically failover to a standard POTS line if the IP connection fails.
Telex System Manager (TSM): View, manipulate and manage multiple Telex device parameters and settings. Easily detect all Telex devices on the network for easy configuration.
Kenwood P25 TK5710/5810 serial control – Supports encode and decode of FleetSync ID and P25 ID, channel change, scan ON/OFF, and monitor. Also capable of direct serial control of Kenwood 80, 90, and 150 series radios.
Generate FleetSync MSK signal at the IP223 – Does not require specific Kenwood base station.
100 talkgroup/frequency control
Simplex/full-duplex (field programmable)
Crossmute (Ethernet based)
Parallel console update
Instant Recall Recorder (IRR)
Line select call with alarm Controls
Monitor, Intercom, PTT
Up to two alert tones
Crosspatch
Supervisory control
16-digit DTMF keypad
Volume controls
Parallel TX LED detect
Frequency selection
Menu button for direct menu access
NEO-10 relay control
Paging (two-tone, DTMF, and manual)

Amplifier Power	`2W maximum at 3%THD into an 8 Ohm load or equivalent`
Audio Distortion	`3% maximum at full compression`
Audio Frequency Response	`±1.5dB, 300 to 3000Hz, except at the transmit tone notch frequency`
Audio Levels	`Range: RX +12dB through -34.5dB, TX +12dB through -34.5dB`
Color	`White`
Connections	`4-wire Handset, 6-wire Deskmic`
Depth	`10" (254 mm)`
Ethernet Speed	`10 BaseT or 100 BaseTX`
Form Factor	`Desktop`
Height	`3" (76.2 mm)`
Hum and Noise	`50dB below operating levels`
Operating Temperature	`0° to 50 °C (32° to 122°F)`
Power Requirements	`+12VDC at 1A maximum`
Speaker	`1.5” x 3” oval, 8 Ohm`
Weight	`2.94 lbs (1.33 kg)`
Width	`8" (203.2 mm)`